Garage door repair in Yorktown can be tricky, especially when attempting to diagnose why your garage door won’t close all the way. There are several common causes of this issue and some potential solutions that you should consider before calling a technician. In this article, we’ll explain these causes and solutions so you can try to fix the problem yourself.
The first and most common issue is a door misalignment, meaning the parts are not properly aligned and the door cannot close completely. The poor alignment may be due to shifting in the tracks, worn rollers, or loose hinges. To resolve this issue, check for any obstructions in the tracks, such as dirt or debris. Then, ensure that everything is properly tightened and aligned along each track.
Another problem could be with the springs, which are what hold the door up when it’s in an open position. If these springs are too weak or too strong, they can cause your garage door to malfunction and fail to close. To fix this, make sure you’ve got the right springs installed, and also check that they are correctly balanced. If necessary, you can adjust the springs’ tension by either tightening or loosening them.
Finally, sometimes in older models it could be an issue with the opener itself. This is because when the door closes, it relies on the power from the opener to complete that process. If your opener is weak or malfunctioning, it could prevent the door from closing properly. To repair this issue, you’ll need to replace or upgrade the motor in your garage door opener.
